Radar Level Sensor

Radar Level Sensor
WXR109

Features

The radar level meter may be fitted in a variety of metal and non-metal containers and pipes due to its large detection range and low beam energy. It works well in situations where there is steam, inert gas, dust, and water mist. The radar level meter is safe for both the environment and humans to use. Its benefits include not requiring on-site calibration, being unaffected by changes in the dielectric constant, and not being impacted by the specific gravity of the medium.

Description

Technical Details

Applications

Accessories

Documents

01

Introduction to Radar level meter for corrosive liquid

The meter picks up the reflection when the product surface reflects the pulse. Subsequently, the apparatus computes the pulse return time and converts that interval into a level measurement. Radar signals sent from the antenna at the top of the tank are used to determine the liquid's (or solid's) level. The antenna receives the echo after the liquid surface reflects the radar signal. Because of the frequency variation in the signal, the echo is slightly different. The radar level transmitter is safe for both the environment and humans to use. Its benefits include not requiring on-site calibration, being unaffected by changes in the dielectric constant, and not being impacted by the specific gravity of the medium. In many industrial applications, radar level measurement is a very precise and dependable way to determine the level of liquids or solids. This method measures the distance between the surface of the substance being measured and the radar sensor using electromagnetic waves.

02

Uses of Radar level
transmitter

Treatment of Water and Wastewater: Tank Level Monitoring: Maintaining ideal levels in processing and storage tanks. Tracking the flow rates in channels and weirs is known as open channel flow measurement. Gas and Oil: Tank Farm Management: Monitoring stock levels in huge storage tanks. Separator Vessels.

03

Application of Radar level transmitter

Water and Wastewater Treatment: For keeping an eye on the water levels in treatment facilities, reservoirs, and tanks. Gas and oil: For gauging the levels in separators, storage tanks, and other process vessels. Food and Beverage: To keep an eye on the quantities of components, fillers, and final goods.

Principle of Radar level meter for corrosive liquid

The guided wave radar emits high-frequency microwave pulses that travel along steel rods or cables for detection. These pulses come into contact with the media to be measured, and because the mutation’s dielectric constant causes reflections, some of the pulse energy is reflected back. The relationship between the transmitted pulse and the reflected pulse depends on the measured media’s distance and time interval.

Technical Specification

Product

Radar level meter

Model

WXR109

Application

Corrosive liquid

Process Connection

Thread, Flange

Medium Temperature

-40℃~130℃

Process Pressure

-0.1~0.3MPa

Protection Grade

IP67

Accuracy

±5mm(range 5m)
±10mm(range 10m)

Frequency Range

26GHz

Signal Output

4-20mA
RS485/Modbus

Power supply

DC(6~24V)/ Four-wire
DC 24V / Two-wire

Applications

Heating and Cooling Reactors

Heating and cooling reactors are crucial components in various industrial processes, particularly in chemical, pharmaceutical, and food industries. These reactors are used for carrying out reactions under controlled temperature conditions.

Disinfecting and
Sterilizing

Disinfection and sterilization are critical processes across various industries, particularly in healthcare, pharmaceuticals, food processing, and biotechnology. These applications ensure the elimination of harmful microorganisms.

Waste Heat Recovery Boilers

Waste heat recovery boilers are essential components in industries where significant amounts of heat are generated during various processes but are typically wasted. These boilers capture this waste heat and convert it into useful energy, thereby improving.

Dyeing WasteWater

Treatment of highly coloured wastewater containing a variety of dyes in varying quantities is a major component of wastewater treatment in the textile and dye industry.The flow of dye into the interior of the fibre as well as the interaction between a dye .

Exhaust Gas Treatment

Exhaust gas treatment systems (EGTS), also referred to as SOX scrubbers, are an alternative to these solutions that clean the exhaust gas in order to reduce SOX emissions to a level that is equivalent to the acceptable fuel sulphur
content.

Fertigation System

Fertigation is the process of injecting fertilisers into an irrigation system for the purpose of amending the soil, the water, and other water-soluble goods. Adding chemicals to an irrigation system is known as chemigation, which is connected to fertigation.

Accessories

Documents

Technical Datasheet_Ultrasonic level transmitter_En_V1_2023

User Manual_Ultrasonic level transmitter_En_V6_2023

Wellkonix global commitment to the Chemical Industry

Wellkonix is the world leader in automation solutions to the chemical industry. As a global player, we have strong local support in any region that you run your business

Solutions

automation

Project execution

Providing solutions of every kind, at all times in chemical industries

Wellkonix engineers were all very affected person and cooperative during the early engineering and start-up phases. We labored as one team thru to the completion of this plant project